Do you want to change the size of your tyres? It is possible, but there are some restrictions. In this article, we go through them.
What is the size of a tyre?
- The width (e.g. 205) in millimetres.
- The aspect ratio (e.g. 55) in percent. This is the ratio between the height of the sidewall of a tyre and the width of the tyre.
- The type (e.g. R for radial)
- The diameter (e.g. 17) in inches.
- The load rating (ex: 91) This number is an index that corresponds to a maximum load that can be supported by a single tyre.
- The speed rating (e.g. V) This letter is an index that corresponds to the maximum speed at which a tyre can carry its maximum load.
What size changes are possible?
On a vehicle, there is the standard fitment proposed by the manufacturer as well as optional fitments, which provide several alternatives approved by the manufacturer.
Example for a PEUGEOT 308 - 1.2 pure tech of 2021:
195/65 R15 91H
205/55 R16 91V
205/50 R17 93V
225/45 R17 91V
225/40 R18 92V
For example, it is possible to choose a different tyre diameter, usually from three options. A car can have an approved wheel diameter of 15, 16 and 17 inches.
Changing the diameter of the wheels means, of course, replacing the rims, which can be made of sheet metal, like the original ones, or of aluminium, which is lighter and more attractive.
The various dimensions provided by the car manufacturer are all approved for the vehicle.
It is very easy to find out which dimensions are approved: they are usually indicated on the sticker in the driver's door or in the owner's manual, sometimes also in the fuel filler flap.
Can I fit a different size than the approved ones?
It is imperative to respect the sizes approved by the manufacturer. In some countries, an exemption is possible provided that the tyre diameter remains within a limit of no more than -2% and +1.5%.
It is recommended that the approved sizes are respected so as not to compromise your safety, that of your passengers and that of other drivers on the road. By choosing non-approved sizes, you could, for example, fit tyres that are too wide and protrude dangerously beyond the width of the vehicle. Or tyres with an insufficient load index, for example for commercial vehicles whose function often involves carrying a load.
In addition, as the speedometer takes into account the diameter of your wheels, the speed displayed on your dial could be inaccurate as well as the number of kilometres on your speedometer.
What are the consequences if I don't respect the homologation?
Even if a margin of tolerance is allowed in some countries, failure to comply with the approved dimensions exposes you to certain risks:
- safety risks
- a fine in the event of a police check
- a refusal to have your vehicle inspected
- not being covered by your insurance in the event of an accident
On the other hand, if you respect the approved dimensions, you benefit from flexibility while avoiding these inconveniences.
When do I have to change my tyre size?
If your vehicle is imported from another continent, it is advisable to ensure that its tyres comply with the local approval provided by the manufacturer.
(R30 and R117 regulations as indicated by the E2 marking on the sidewall of the tyre).
For example, if your vehicle is imported into Europe from the United States, you are legally obliged to adapt to the European homologations and to change the size of your tyres accordingly.
How many tyres should I change at the same time?
It is imperative that all four tyres are re-sized at the same time, not just two tyres on the same axle.
Now that you have all the information you need to change your tyre size, you can use our tyre selector below to find the right tyres for you: